top of page

FREQUENTLY ASKED QUESTIONS

  • What type of metal is best for my job/project?
    Contact one of our experienced team members to discuss your project and we can advise or suggest what type of metal/product will best suit your requirements.
  • How much metal will I need?
    This will depend on the size of your job/project, coverage, etc. Your contractor may be able to estimate the cubic metres or tonnage that you will require, or feel free to chat to one of our despatch team members.
  • How do I calculate cubic metres?
    To calculate out the cubic metres (m3) that you may require, follow this simple calculation: length x width x depth. e.g. if your area is 8 metres long x 3 metres wide and you want a depth of approximately .25 metres, its 8 x 3 x .25 = 6 m3
  • Can I open an account?
    If you intend to be a regular customer, we are more than happy for you to request an Account Application form and provide us with the information to enable us to set up your credit account. Terms and conditions will apply. Email accounts@nevillebros.co.nz to request a form.
  • Can I pick up some metal in my trailer/vehicle?
    Yes. We have a supply of most metals in our yard to enable customers to bring their trailer and cart away their metal without the cost of a freight charge. Payment can be made direct to our office once loaded up. Our yard is open Mon - Sat for pickups. Location: 27 Kahikatea Flat Road, Dairy Flat.
  • Do you do truck hire only?
    Yes, our large fleet of Neville Brothers' trucks are available for hire with driver to cart your metal supplies or remove your cleanfill/spoil from site to tip. Enquire with our team to see how we can help with cartage. Hourly rates vary with truck size.
  • What does MAP, PAP, SAP or WAP mean?
    These are different grades and types of ALL PASSING (AP) products. ALL PASSING means any piece of metal (aggregate) smaller than the product suffix will be included in the product (e.g. AP40 = 40mm or less) as it will 'pass through' the 40mm sieve. MAP = MAINTENANCE ALL PASSING PAP = PREMIUM ALL PASSING SAP = STABILIZED ALL PASSING WAP = WASHED ALL PASSING
  • Do you transport stock?
    Though you may see Neville Brothers stock trucks out on the roads, unfortunately, we no longer deal in stock cartage. Please contact Braybrook Livestock (Craig) 027 242 0966 for stock cartage.
  • Can you move a 40foot container?
    Yes, we can move 40foot containers. If your container contains items that can move about, this may cause problems when lifting and affect the balance. Please call us to discuss. Hiab contact is Allan: 027 459 1009
  • What weight limit do your hiab cranes lift?
    This can vary due to several reasons when lifting and moving large items. Please call us to discuss. Hiab contact is Allan: 027 459 1009
  • How high can you lift a load?
    This will depend on the weight of the load and possibly other factors. Please contact us to discuss. Hiab contact is Allan: 027 459 1009
  • Do you work outside of the greater Auckland area?
    Yes, at times we have done work further afield. Please contact us to discuss your job requirements to see if we can help. Hiab contact is Allan: 027 459 1009
  • Are your operators qualified?
    Our drivers/operators are trained and qualified to use the hiab equipment.
NB logo

09 426 5901

TRANSPORT DIVISION

027 459 1009

HIAB DIVISION
ACCOUNTS

©2023 by Neville Brothers Limited. Proudly created with Wix.com

SUPPLY YARD HOURS:

Mon - Fri 7am - 5pm

Sat 7:30am - 1pm


OFFICE HOURS:

Mon - Fri 6am - 6pm

Sat 7:30am - 1pm


Closed Sundays & Public Holidays

bottom of page